Stock suficiente!Listo para enviar
Combina bien con
Dispositivos compatibles
Cámaras de acción (GoPro, Insta360), smartphones, SLR & cámaras sin espejo
Tipo de montaje
Soporte para cámara de coche
Característica especial
Articulaciones de doble bola 360°, Empuñadura antivibraciones, Indicador de liberación rápida
Acerca de este artículo
Nuestro mecanismo de bloqueo por giro de precisión y el diseño de doble ventosa ofrecen una estabilidad inigualable en superficies lisas, por lo que tus grabaciones permanecen sin vibraciones incluso en carreteras con baches.
- Tomas estables en todo momento – Las dobles ventosas y el sellado al vacío con perilla evitan las vibraciones y que la cámara se desprenda, así puedes concentrarte en grabar, no en revisar el soporte.
- Compatibilidad universal – Un solo soporte es compatible con GoPro, Insta360, smartphones, cámaras DSLR y cámaras sin espejo—ya no tendrás que cambiar entre varios soportes.
- Control total del ángulo – El brazo de doble bola permite rotar 360°, capturando todas las perspectivas sin reajustes incómodos.
- Diseñado para durar – Aleación de aluminio de grado aeronáutico con sellos de goma soporta cargas de hasta 0.5 kg a velocidades inferiores a 50 mph, eliminando fallos de succión.
- Instalación sin esfuerzo – Montaje sin herramientas con un claro indicador de bloqueo rojo/verde que te guía en la instalación en segundos, reduciendo el tiempo de montaje y la frustración.
Carga máxima: 1.1 lb / 0.5 kg.
Montar únicamente en liso, limpio, no poroso superficies. Limpie la superficie antes de usarla.
Conduzca suavemente por debajo 50 millas por hora (80 km/h).
Compruebe la succión y el indicador de bloqueo verde cada 2 horas.
Para mayor seguridad, adjunte lo incluido cuerda de seguridad a tu cámara — la mantiene segura incluso en paseos con baches o con viento.
Envío
Disfruta de envío estándar gratuito en pedidos superiores a $15.
Los pedidos se procesan en 1–2 días hábiles y normalmente se entregan en 6–15 días.
El envío exprés no está disponible actualmente.
Para más detalles, consulta nuestra Política de envío.
Devoluciones y reembolsos
Los artículos sin abrir pueden devolverse dentro de los 14 días para obtener un reembolso completo.
Los artículos deben estar en su condición original. Los artículos usados o abiertos pueden estar sujetos a una tarifa de reposición según su estado.
Nota: El envío de la devolución no está cubierto a menos que la devolución se deba a un error nuestro.
Para más información, consulta nuestra Política de devoluciones y reembolsos.
| Nombre de la especificación | Valor de la especificación |
|---|---|
| Patrón de color | Negro |
Agrega tu contenido aquí
Soporte de ventosa
Recibe una notificación cuando este artículo esté nuevamente en stock
Looks really good, one of the best sucrion cup cell holder i had..
I got several of these to do full on head to head comparison.... nope.I tried 3 of them and none performed really well.TBS, this one was VERY close to being good.It held on the longest the versatility of this model, with removable accessory mounts, etc., really put it ahead of the other two... by a LOT. The quality of the mount with the locking suction turn. The adjustability of the arm.... good stuff! But the suction part... ick.NONE of the ones I tested held onto a painted surface with a iPhone 14 Pro Max above it, without it eventually coming lose. So while it may be good with an action cam, and/or on some surfaces more than others.... eventually, within 5min or 5days... it will fall off.My biggest green flag.... the mount. I have not be using this as a way to mount an expensive camera or phone... on or in a car. I have been using it to mount different light weight video accessories in my kitchen... when making videos.Stick the mic to the face of the microwave, so it is close to my face... stick a light to the side of the fridge to get a good angle.... etc....so... IDK. It's hard to rate this. I am going 4 stars because it is WAY better, in several ways, than the other units I played with... but I cant get to 5 stars because of the unreliability of "suction" as a mounting technique as a whole.So I would get more, and I would recommend to friends.... just not for use in a car.
Very good quality. sturdy, durable and functional. i feel like its perfect for the car.
Strong mount, able to adjust any direction does not shake or bounce very stable..Great Product
This suction cup mount is all you will need for an action cam like GoPro, DJI Action series, or Insta360, among others. It includes three type of mounts, 1/4-inch tripod mount, action cam mount, or smartphone holder. This is designed very well as it holds my Insta360 X4 and my DJI Action 4 inside or outside the vehicle. Although the included smartphone holder is the best I've ever seen, I still wouldn't trust an iPhone mounted on the outside of a vehicle with just a simple pressure mount. But inside of the vehicle, no problem. Inside the car you can attach it to any glass surface, even upside down on the sunroof! The suction cup mount attaches very well, I have no fear of it falling off. You can tug on it pretty hard just to test it. But make sure your surfaces are clean. I always rigorously clean whatever surface I am attaching this to. This is the most durable mount I've used of this type. Given the price of $28, I'd say this is a very good value for the money for such a well-built, high quality action cam mount. Good work, Maectech!